The LG-900 series detectors are reflection type optical (LG-916, LG-9200) and photoelectric detectors developed for medium distance detection applications. The LG-916 / LG-9200 adopts glass fiber at the tip end and can be protective enough against the external turbulent light because of pulse modulation system as the light projection source. The LG-930 also uses a pulse-lighting method, it is practically unaffected by disturbance light, furthermore, featuring a hybrid structure with the all light-projecting, light-receiving, amplifying, and waveform-shaping sections built into the unit to offer a compact design with easy-to-operate functions. By simply attaching the reflection mark to a rotating object, the detectors can detect the rotation of the object without actually touching the object.
- Designed to compact and easy-to-operate for projector, light receiver and amplifier integrated neatly
- Non contact detection applied, no load on the object
- Detection distance 70 to 200 mm
- Response speed 25 m/s
- Power supply12±2 VDC, 85 mA or less
- TTL Output waveform
Compatible Tachometers: Ono Sokki TM-2110, TM-2120, TM-2130, TM-2140, TM-3100 Series, SE-1620, and CT-6520B
Old Tachometer Sensor Compatibility Chart
TACHOMETER SENSOR |
TACHOMETER |
||||||
CT-6520/6520B |
SE-1520/1620 |
SE-1400 |
FT-1500 |
TM-2100 |
GE-1100 |
||
CP-044 | Clamp-On Fuel Injection Line | Note 1 | X | ||||
CP-1060 | Clamp-On Fuel Injection Line | Note 1 | X | ||||
CP-1064 | Clamp-On Fuel Injection Line | Note 1 | X | ||||
FT-0501 | Magnetic Flux Leakage Detector | X | |||||
IP-292 | Inductive Clamp-On (Primary) | X | X | Note 2 | |||
IP-296 | Inductive Clamp-On (Secondary) | X | Note 2 | ||||
IP-2800 | Inductive Suction Cup (Primary) | X | |||||
IP-3000 | Inductive Clamp-On (Primary) | X | X | Note 2 | |||
LG-916 | Optical Tachometer Sensor | MX-800 Series | MX-700 Series | ||||
MP-910 | Magnetic Pickup | MX-000Series | MX-500 Series | ||||
MP-981 | Hall-Effect Magnetic Pickup | MX-800 Series | MX-700 Series | ||||
MP-910 | Magnetic Pickup | MX-000Series | MX-500 Series | ||||
OM-200 | Magnetic Flux Detector | MX-000 Series | Note 3 | Note 2 | |||
VP-201 | Vibration Sensing Tach Sensor | X | Note 3 | X | |||
VP-202 | Vibration Sensing Tach Sensor | X | |||||
Measurement Microphone | Note 4 | ||||||
Vibration Transducer | Note 4 |
KEY
Blank => sensor is not compatible with tachometer Model # => sensor is compatible with tachometer using the specified cable model #
X => sensor is compatible with tachometer using integral cable
Note => sensor may be used with this tachometer with certain restrictions (see below)
Note 1: CP-Series Clamp-On sensors may be used with FT-1500 tachometer for diesel engine rpm measurements. In-line charge amplifier is required. Please contact us for details.
Note 2: IP-Series Inductive sensors may be used with the FT-1500 tachometer for rpm measurements on DC motors. Please contact us to discuss your application.
Note 3: A special modification is available for the SE-1520 tachometer that will permit the